System information

July 2006 - InnoMedia

InnoMedia Confidential

CONNECTING YOUR WORLDS

Please enter the channel No (enter for all channel):

All the channels are traced.

Please enter the group you want to trace:(0xFFFFFFFF or q to

quit) 0x2

Group mask set to: 0x2

Please enter the level you want to trace: 0

No trace is selected. Use default '0'

INFO: read from NVS_PRIMARY (0x422)

INFO: write to NVS_SECONDARY (0x423)

Dl Configuration Description

1: show – display the current trace settings

2: channel – specify the channel to be traced. Press enter to trace all channels

3: group – specify the trace group/module. The E-MTA has following Group Settings:

NOTE: In order to disable any of the groups, the "0x0" must be entered

UTIL_LOG_GROUP :0x1

SYSTEM_LOG_GROUP :0x2

UART_LOG_GROUP :0x4

FLASH_LOG_GROUP :0x8

WEB_SERVER_LOG_GROUP :0x10

DSP_LOG_GROUP :0x20

SNMP_LOG_GROUP :0x40

VOIP_LOG_GROUP :0x80

PROV_LOG_GROUP :0x100

SYNC_LOG_GROUP :0x800

TELNET_LOG_GROUP :0x2000

DQOS_LOG_GROUP :0x4000

T38_LOG_GROUP :0x10000

RTCP_LOG_GROUP :0x20000

JITTER_LOG_GROUP :0x40000

STACK_LOG_GROUP :0x80000

CALL_PROC_GROUP :0x800000

ETHERNET_LOG_GROUP :0x400000

To trace SYSTEM_LOG_GROUP, enter “0x2” at the prompt.

If more than one groups will be traced, add up the second value (the value after “x”) of

each group and then enter the value in this format “0x (total)” at the prompt. For example,

to trace T38_LOG_GROUP and RTCP_LOG_GROUP, enter “0x30000” at the prompt.

4: verbose – enable or disable trace verbose. To see more detailed trace log, enable this

function; otherwise, disabled it.

5: level – specify the trace level to limit the information you would like to see

. Enter 0 to

disable the trace function, 40 for basic debugging, 60 to access the DSP information, and

80 for most debugging.

6: store – Save new input value.