System information

22
July 2006 - InnoMedia
© 2006 InnoMedia. All rights reserved.
InnoMedia Confidential
CONNECTING YOUR WORLDS
SAMPLE
UD0
Debugging is disabled.
Enable Debugging (D1)
The "D1" command is used to enable debugging.
SAMPLE
UD1
Debugging is enabled.
Trace Settings (Dl)
The "Dl" command is used to configure the trace settings.
SAMPLE
UDl
1:show
2:channel
3:group
4:verbose
5:level
6:store
others: exit
1
UTIL_LOG_GROUP :0x00000001 On
SYSTEM_LOG_GROUP :0x00000002 On
UART_LOG_GROUP :0x00000004 On
FLASH_LOG_GROUP :0x00000008 On
WEB_SERVER_LOG_GROUP :0x00000010 On
DSP_LOG_GROUP :0x00000020 On
SNMP_LOG_GROUP :0x00000040 On
VOIP_LOG_GROUP :0x00000080 On
PROV_LOG_GROUP :0x00000100 On
SYNC_LOG_GROUP :0x00000800 On
TELNET_LOG_GROUP :0x00002000 On
DQOS_LOG_GROUP :0x00004000 On
T38_LOG_GROUP :0x00010000 On
RTCP_LOG_GROUP :0x00020000 On
JITTER_LOG_GROUP :0x00040000 On
STACK_LOG_GROUP :0x00080000 On
CALL_PROC_GROUP :0x00800000 On
ETHERNET_LOG_GROUP :0x00400000 On
Trace Channel = -1
Trace Level = 0
Trace Verbose = On
2