System information

July 2006 - InnoMedia

InnoMedia Confidential

CONNECTING YOUR WORLDS

Please enter the Primary DNS Server IP Address...

10.0.0.253

Primary DNS Server IP Address Entered: 10.0.0.253

Please enter the Second DNS Server IP Address...

90.0.0.252

Second DNS Server IP Address Entered: 10.0.0.252

Do you want to store the changes permanently?[y/n]y

Please wait for flash update...

Please reboot the system

Ci configuration description

DHCP = Answer Y if you use a DHCP server to assign IP addresses.

Otherwise, answer N

Gateway FQDN = You may assign an FQDN (Fully Qualified Domain Name) for this

MTA. This step is optional and may be left blank.

IP Address = Enter the static IP you wish to assign to the MTA

IP Mask = Enter the Subnet Mask used on your network

Default Gateway = Enter the IP of the Default Gateway used on your network

DNS Sever = Enter the primary and secondary DNS server IPs

Configuring VLAN Setting (Cv)

The "Cv" command is used to set the parameters for VLAN tagging on the MTA. This

advanced feature is only recommended if your network consists of VLAN-enabled servers

and components. If you are unsure whether your network is using VLAN, leave it disabled

on your MTA. To enable VLAN tagging on the WAN port, select interface "0". To enable

VLAN tagging on the LAN port, select interface "1".

SAMPLE:

UCv

====================

VLAN CONFIGURATION

====================

SELECT PHYSICAL INTERFACE [0-1] 0=WAN port, 1=LAN port: 0

CURRENT PHYSICAL INTERFACE No. : 0

VLAN TAGGING : DISABLED

IP TOS TO 802.1p PRIORITY MAPPING : DISABLED

VLAN ID : 0x002

802.1p PRIORITY : 0

ENABLE VLAN TAGGING (y/n): y

ENABLE IP TOS TO 802.1p PRIORITY MAPPING (y/n): y

PLEASE INPUT VLAN ID [0x000-0xFFF]: 0x000

PLEASE INPUT VLAN PRIORITY [0-7]: 0

SAVE VLAN CONFIGURATION. PLEASE WAIT ...

Ks8993M_Set_DiffServ RtpTos 0

Done.

Disable Debugging (D0)

The "D0" command is used to disable debugging.