System information

20
July 2006 - InnoMedia
© 2006 InnoMedia. All rights reserved.
InnoMedia Confidential
CONNECTING YOUR WORLDS
R: Reset system
E: Exiting and Logout
Viewing the Current IP Information (Cf)
Use the "Cf" command to view your MTA’s current IP settings.
SAMPLE:
UCf
Your current configuration:
Ether Address = 00:10:99:01:e5:43;
You are using DHCP.
Local IP = 10.241.14.166;
Local IP Mask = 255.255.255.192;
Local Default GW IP = 10.241.14.129;
Local Default GW Mask = 255.255.255.192;
Primary DNS Server IP = 10.241.14.2;
Your MTA's FQDN =
System Enable Provisioning Process = TRUE;
Your LAN port setting:
Virtual device :
IP address = 192.168.99.1
Subnet mask = 255.255.255.0
Gateway IP address = 192.168.99.1
Configuring IP Information (Ci)
The "Ci" command is used to configure the IP information such as IP address, default
Gateway IP address, DNS server IP address or call agent IP address. In addition, you may
modify other host settings as described later in this document. Reboot the MTA when you
finish the configuration.
NOTE: Type the commands in bold face and match case as shown.
SAMPLE:
UCiU
Do you use DHCP to get dynamic IP address and IP mask? [y/n]
n
Please enter the Gateway FQDN :
Input name is :
Please enter your IP address...
Example: 192.45.6.4
10.0.0.1
IP address entered: 10.0.0.1
Please enter your IP Mask...
255.255.255.0
IP Mask entered: 255.255.255.0
Please enter your Default Gateway IP addr...
10.0.0.254
Gateway IP address entered: 10.0.0.254