System information

19
July 2006 - InnoMedia
© 2006 InnoMedia. All rights reserved.
InnoMedia Confidential
CONNECTING YOUR WORLDS
Logging In
Help (H)
Command "H" prompts for Username and Password for users to login and also displays a
list of the MTA commands.
SAMPLE:
UH
Enter Username: Admin
Enter Password: adminpass
Help
I: Show System Information
Ih: Show Hardware Information
C: Configuration of IP Information
Cf: Get the current IP Information
Ci: Re-Configure the IP Information
Cv: Configure VLAN Setting
D: Debug Information
D0: Disable Debugging
D1: Enable Debugging
Dl: Trace Settings
Dn: Show the state of connections for all endpoints
Ds: Show notification information for all endpoints
Dt: Show DHCP lease information
Du: Show RTP statistics
M: Miscellaneous Settings
M0: Show MTA SNTP time
M1: Configure NTP server
M2: Configure log server
M3: Show syslog
M4: Signal default timeout configure
Ma: RFC2833 control
Mb: System alive time
Mc: Information of Call agent ID and port
Md: Dynamic playtype setting
Me: Information of control parameters
Mf: Flash_Hook_timer_Setting
Mg: Voice_Service_Control
Mj: Information of Jitter Buffer Size, Bandwidth Parms
Mk: MGCP local ports configuration
Ml: Information of Line parameters
Mn: Information of IP Information
Mq: Dummy packet timer setting
Mp: Configure phone lines
Mr: Configure the voice volume
Mt: Test SNMP trap message
Mx: Configure the endpointname
Mw: Change password
P: Ping