System information

12
July 2006 - InnoMedia
© 2006 InnoMedia. All rights reserved.
InnoMedia Confidential
CONNECTING YOUR WORLDS
Figure 10. Configuring Call Agent Settings
Configuring Endpoint Names
The endpoint names can be either configured explicitly or automatically assigned by the
call agent. To configure endpoint names, follow these steps:
Table 9. Configuring Endpoint Names
Step Action
1
Open your web browser and connect to your MTA (See
XLogging
In
X on page X7X for more details).
2
Click VoIP, and then Endpoint Names.
3
Select Automatic if you want the call agent to assign endpoint
names. Otherwise, select Explicit and enter the endpoint names in
the fields.
NOTE: Explicit can support up to 128 alphanumeric characters.
4
Click Save & Reboot to save the settings to the MTA.