System information

11
July 2006 - InnoMedia
© 2006 InnoMedia. All rights reserved.
InnoMedia Confidential
CONNECTING YOUR WORLDS
Figure 9. Configuring SNMP Setting
Configuring VoIP Settings
Configuring Call Agent Settings
To configure the Call Agent Settings, follow these steps:
Table 8. Configuring Call Agent Settings
Step Action
1
Open your web browser and connect to your MTA (See
XLogging
InX on page X7X for more details).
2
Click VoIP, and then Call Agent.
3
Enter the IP address for Call Agent 1 to 4.
4
Enter the Call Agent UDP port number 1 to 4.
5
Enter MTA Signaling UDP port number. The default is 2427.
6
Enter MTA RTP port number. The default is 6024. RTP port
number has to be an even number with a range of 1024 to 65535
and not equal to the MGCP signaling port.
7
Click Save to save the settings to the MTA.