System information

10
July 2006 - InnoMedia
© 2006 InnoMedia. All rights reserved.
InnoMedia Confidential
CONNECTING YOUR WORLDS
3
Check the option box to enable the provisioning function.
4
Enter the DNS or the IP address of your provisioning server.
5
Enter the port number of your provisioning server.
6
Click the Save & Reboot button.
Figure 8. Configuring Provisioning Settings
Configuring SNMP Settings
To use a SNMP Manager to monitor your MTA, configure the MTA SNMP settings.
Follow these steps for configuration of SNMP Settings:
Table 7. Configuring SNMP Setting
Step Action
1
Open your web browser and connect to your MTA (See
XLogging
In
X on page X7X for more details).
2
Click on IP Network, then SNMP Setting.
3
Enter the SNMP Manager Address where the SNMP software is
installed.
4
Enter the SNMP Community Name #1. It must match the string
configured on your SNMP server. By default, SNMP community
#1 is a read-only community string for SNMP Get- request.
5
Enter in the SNMP Community Name #2. It must match the string
configured on your SNMP server. By default, SNMP community
#2 is a read-write community string for SNMP Set-request.
6
Click the Save & Reboot button to save your changes, or click the
Reset button if you want to undo your changes.