User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Hardware Information
- 2.1 Chassis cover
- 2.2 Air duct
- 2.3 Central Processing Unit (CPU)
- 2.4 System memory
- 2.5 Storage devices
- 2.5.1 Installing an E1.S module (for E1.S module SKU only)
- 2.5.2 Removing an E1.S module (for E1.S module SKU only)
- 2.5.3 Installing an external 2.5” storage device (on selected models)
- 2.5.4 Removing an external 2.5” storage device (on selected models)
- 2.5.5 Installing an internal 2.5” storage device (only for 650W/Short PSU models)
- 2.5.6 Removing an internal 2.5” storage device (only for 650W/Short PSU models)
- 2.6 Expansion slot
- 2.7 Cable connections
- 2.8 Removable/optional components
- 2.9 Rail Kit Options
- Chapter 3: Motherboard Information
- Chapter 4: BIOS Setup
- 4.1 Managing and updating your BIOS
- 4.2 BIOS setup program
- 4.3 Main menu
- 4.4 Performance Tuning menu
- 4.5 Advanced menu
- 4.5.1 Trusted Computing
- 4.5.2 ACPI Settings
- 4.5.3 Redfish Host Interface Settings
- 4.5.4 Onboard LAN Configuration
- 4.5.5 UEFI Variables Protection
- 4.5.6 Serial Port Console Redirection
- 4.5.7 SIO Configuration
- 4.5.8 PCI Subsystem Settings
- 4.5.9 USB Configuration
- 4.5.10 Network Stack Configuration
- 4.5.11 NVMe Configuration
- 4.5.12 APM Configuration
- 4.5.13 Tls Auth Configuration
- 4.5.14 Intel(R) Virtual RAID on CPU
- 4.5.15 Third-party UEFI driver configurations
- 4.6 Platform Configuration menu
- 4.7 Socket Configuration menu
- 4.8 Security menu
- 4.9 Boot menu
- 4.10 Tool menu
- 4.11 Event Logs menu
- 4.12 Server Mgmt menu
- 4.13 Exit menu
- Appendix
4-35
ADDDC Sparing [Disabled]
Allows you to enable to disable ADDDC Sparing.
Configuration options: [Disabled] [Enabled]
The following item appears only when ADDDC Sparing is set to [Enabled].
Enable ADDDC Error Injection [Enabled]
Allows you to enable to disable ADDDC error injection, which is required
forcing the interleave granularity to 64B for B/L step parts.
Configuration options: [Disabled] [Enabled]
Patrol Scrub [Enable at End of POST]
Allows you to enable to disable patrol scrub.
Configuration options: [Disabled] [Enable at End of POST]
The following item appears only when Patrol Scrub is set to [Enable at End of POST].
Patrol Scrub Interval [24]
Allows you to set the number of hours (1-24) required to complete full scub.
A value of zero means Auto.
Configuration options: [0] - [24]
PDDR5 ECS [Enabled]
Allows you to enable to disable DDR5 Error Check and Scrub (ECS).
[Disabled] Disable ECS/Result collection.
[Enable] Enable ECS without Result Collection.
[Enable ECS with Result Collection] Enable ECS/Result Collection.
4.7.5 IIO Configuration
Intel VT for Directed I/O (VT-d)
Press <Enter> to bring up the Intel Virtualization Technology for Directed I/O (VT-d)
configuration menu.
Intel VT for Directed I/O [Enable]
Allows you to enable or disable Intel Virtualization Technology for Directed I/O (VT-d)
by reporting the I/O device assignment to VMM through DMAR ACPI Tables. To
disable VT-d, X2APIC must also be disabled.
Configuration options: [Enable] [Disable]