User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Hardware Information
- 2.1 Chassis cover
- 2.2 Air duct
- 2.3 Central Processing Unit (CPU)
- 2.4 System memory
- 2.5 Storage devices
- 2.5.1 Installing an E1.S module (for E1.S module SKU only)
- 2.5.2 Removing an E1.S module (for E1.S module SKU only)
- 2.5.3 Installing an external 2.5” storage device (on selected models)
- 2.5.4 Removing an external 2.5” storage device (on selected models)
- 2.5.5 Installing an internal 2.5” storage device (only for 650W/Short PSU models)
- 2.5.6 Removing an internal 2.5” storage device (only for 650W/Short PSU models)
- 2.6 Expansion slot
- 2.7 Cable connections
- 2.8 Removable/optional components
- 2.9 Rail Kit Options
- Chapter 3: Motherboard Information
- Chapter 4: BIOS Setup
- 4.1 Managing and updating your BIOS
- 4.2 BIOS setup program
- 4.3 Main menu
- 4.4 Performance Tuning menu
- 4.5 Advanced menu
- 4.5.1 Trusted Computing
- 4.5.2 ACPI Settings
- 4.5.3 Redfish Host Interface Settings
- 4.5.4 Onboard LAN Configuration
- 4.5.5 UEFI Variables Protection
- 4.5.6 Serial Port Console Redirection
- 4.5.7 SIO Configuration
- 4.5.8 PCI Subsystem Settings
- 4.5.9 USB Configuration
- 4.5.10 Network Stack Configuration
- 4.5.11 NVMe Configuration
- 4.5.12 APM Configuration
- 4.5.13 Tls Auth Configuration
- 4.5.14 Intel(R) Virtual RAID on CPU
- 4.5.15 Third-party UEFI driver configurations
- 4.6 Platform Configuration menu
- 4.7 Socket Configuration menu
- 4.8 Security menu
- 4.9 Boot menu
- 4.10 Tool menu
- 4.11 Event Logs menu
- 4.12 Server Mgmt menu
- 4.13 Exit menu
- Appendix
4-29
DBP-F [Disable]
Allows you to enable or disable DBP-F. DBP-F can be turned off by writing into the MSR 6Dh
[2:3].
Configuration options: [Enable] [Disable]
IIO LLC Ways [14:0] (Hex) [0]
Allows you to adjust the LLC value of MSR_IIO_LLC_WAYS bitmask. (All bits set in the mask
must be contiguous to each other).
Configuration options: [0] - [7FFF]
SMM Blocked and Delayed [Disable]
Allows you to enable or disable SMM Blocked and Delayed.
Configuration options: [Disable] [Enable]
eSMM Save State [Disable]
Allows you to enable or disable the eSMM Save State Feature.
Configuration options: [Disable] [Enable]
Smbus Error Recovery [Enable]
Allows you to enable or disable Smbus Error Recovery.
Configuration options: [Disable] [Enable]
Enable Intel(R) TXT [Disable]
Allows you to enable or disable Intel(R) TXT.
Configuration options: [Disable] [Enable]
VMX [Enable]
Allows you to enable or disable Vanderpool Technology. Changes take effect only after
reboot.
Configuration options: [Disable] [Enable]
Enable SMX [Disable]
Allows you to enable or disable Safer Mode Extensions.
Configuration options: [Disable] [Enable]
Lock Chipset [Enable]
Allows you to lock or unlock the chipset.
Configuration options: [Enable] [Disable]
MSR Lock Control [Enable]
Allows you to enable or disable the locking of MSR 3Ah and CSR 80h. Power Good reset is
needed to remove lock bits.
Configuration options: [Disable] [Enable]
PPIN Control [Unlock/Enable]
Allows you to unlock and enable or lock and disable the PPIN control.
Configuration options: [Lock/Disable] [Unlock/Enable]