User Manual

84
Safety information
Your Embedded Computer is designed and tested to meet the latest
standards of safety for information technology equipment. However,
to ensure your safety, it is important that you read the following safety
instructions.
Setting up your system
• Read and follow all instructions in the documentation before you
operate your system.
• Do not use this product near water or a heated source.
• Set up the system on a stable surface.
• Peripherals with extended tolerance (such as industrial grade mSATA and
micro SD card) will allow this product to be used in environments with
ambient temperatures between 0˚C and 60˚C with 0.1 m/s air flow.
• The product should be used in environments with an ambient
temperature of 60˚C when using the 120 W power adapter.
• If you use an extension cord, make sure that the total ampere rating of
the devices plugged into the extension cord does not exceed its ampere
rating.
• This equipment should be installed and operated with a minimum
distance of 20 cm between the radiator and your body.
• Restricted Access Area:
The equipment should only be installed in a Restricted Access Area
where both these conditions apply:
– access can only be gained by skilled or instructed persons who have
been instructed about the reasons for the restrictions applied to the
area and about any precautions that shall be taken; and
– access is through the use of a TOOL or lock and key, or other means of
security, and is controlled by the authority responsible for the area.
• This device shall not be connected to an Ethernet network with outside
plant routing.