User Manual
Table Of Contents
- About this manual
- Chapter 1: Getting to know your Embedded Computer
- Chapter 2: Using your Embedded Computer
- Chapter 3: Upgrading your Embedded Computer
- 3.1 Removing the bottom cover
- 3.2 Replacing the bottom cover
- 3.3 Installing memory modules
- 3.4 Installing 2.5-inch storage device
- 3.5 Installing an M.2 SSD
- 3.6 Installing a nano SIM card
- 3.7 Installing a wireless card to the M.2 (E-key) slot
- 3.8 Installing an M.2 B-key module
- 3.9 Installing antennas (optional)
- 3.10 Installing wall mount brackets (optional)
- 3.11 Installing the VESA mount (optional)
- Chapter 4: Watchdog Timer
- Appendix
66
3.9 Installing antennas (optional)
You may install antennas to the antenna jacks located on the right and
rear panels. The installed antennas can be connected to a 4G LTE or 5G NR
module installed in the M.2 B-key slot or to a wireless card installed in the
M.2 E-key (Wi-Fi) slot.
4G module with two RF connectors and wireless card
For
Wi-Fi
For
4G
ANT.1
ANT.3 ANT.6
ANT.2
ANT.5ANT.4