User Manual
Table Of Contents
- About this manual
- Chapter 1: Getting to know your Embedded Computer
- Chapter 2: Using your Embedded Computer
- Chapter 3: Upgrading your Embedded Computer
- 3.1 Removing the bottom cover
- 3.2 Replacing the bottom cover
- 3.3 Installing memory modules
- 3.4 Installing 2.5-inch storage device
- 3.5 Installing an M.2 SSD
- 3.6 Installing a nano SIM card
- 3.7 Installing a wireless card to the M.2 (E-key) slot
- 3.8 Installing an M.2 B-key module
- 3.9 Installing antennas (optional)
- 3.10 Installing wall mount brackets (optional)
- 3.11 Installing the VESA mount (optional)
- Chapter 4: Watchdog Timer
- Appendix
54
5. Connect the storage device cable to the storage device.
IMPORTANT! This device only supports 7mm 2.5-inch SSD.
6. Connect the storage device cable to the SATA6G and SATA_PWR
connectors on the motherboard.
7. Replace the bottom cover, then secure the bottom cover using the
two (2) screws removed previously.
8. Replace the four (4) rubber feet screws removed previously.