User Manual
Table Of Contents
- About this manual
- Chapter 1: Getting to know your Embedded Computer
- Chapter 2: Using your Embedded Computer
- Chapter 3: Upgrading your Embedded Computer
- 3.1 Removing the bottom cover
- 3.2 Replacing the bottom cover
- 3.3 Installing memory modules
- 3.4 Installing 2.5-inch storage device
- 3.5 Installing an M.2 SSD
- 3.6 Installing a nano SIM card
- 3.7 Installing a wireless card to the M.2 (E-key) slot
- 3.8 Installing an M.2 B-key module
- 3.9 Installing antennas (optional)
- 3.10 Installing wall mount brackets (optional)
- 3.11 Installing the VESA mount (optional)
- Chapter 4: Watchdog Timer
- Appendix
53
3.4 Installing 2.5-inch storage device
1. Remove the four (4) screw hole covers from the bottom cover, if they
exist.
2. Prepare your 2.5-inch storage device, then position it within the two
diagonally opposite laser-etched marks on the bottom cover of your
Embedded Computer.
3. Align the four (4) screw holes on the storage device with the ones on
the bottom cover.
4. Secure the storage device to the storage bay using four (4) screws.
Laser-etched marks