User Manual
Table Of Contents
- About this manual
- Chapter 1: Getting to know your Embedded Computer
- Chapter 2: Using your Embedded Computer
- Chapter 3: Upgrading your Embedded Computer
- 3.1 Removing the bottom cover
- 3.2 Replacing the bottom cover
- 3.3 Installing memory modules
- 3.4 Installing 2.5-inch storage device
- 3.5 Installing an M.2 SSD
- 3.6 Installing a nano SIM card
- 3.7 Installing a wireless card to the M.2 (E-key) slot
- 3.8 Installing an M.2 B-key module
- 3.9 Installing antennas (optional)
- 3.10 Installing wall mount brackets (optional)
- 3.11 Installing the VESA mount (optional)
- Chapter 4: Watchdog Timer
- Appendix
43
2.1.2 Connect a display panel to your Embedded
Computer
You can connect a display panel or projector to your Embedded Computer
that has the following connectors:
• HDMI™ connector
• DisplayPort
Connect display via HDMI
TM
port
To connect a display panel to your Embedded Computer:
Connect one end of an HDMI™, or a DisplayPort cable to an external display,
and the other end of the cable to your Embedded Computer’s HDMI™ port,
or DisplayPort.