User Manual
Table Of Contents
- About this manual
- Chapter 1: Getting to know your Embedded Computer
- Chapter 2: Using your Embedded Computer
- Chapter 3: Upgrading your Embedded Computer
- 3.1 Removing the bottom cover
- 3.2 Replacing the bottom cover
- 3.3 Installing memory modules
- 3.4 Installing 2.5-inch storage device
- 3.5 Installing an M.2 SSD
- 3.6 Installing a nano SIM card
- 3.7 Installing a wireless card to the M.2 (E-key) slot
- 3.8 Installing an M.2 B-key module
- 3.9 Installing antennas (optional)
- 3.10 Installing wall mount brackets (optional)
- 3.11 Installing the VESA mount (optional)
- Chapter 4: Watchdog Timer
- Appendix
42
IMPORTANT!
• We strongly recommend that you use only the AC power adapter
and cable that came with your Embedded Computer.
• We strongly recommend that you use a grounded wall socket while
using your Embedded Computer.
• The socket outlet must be easily accessible and near your
Embedded Computer.
• To disconnect your Embedded Computer from its main power
supply, unplug your Embedded Computer from the power socket.
WARNING!
• Do not use power adapters or batteries from other devices to
reduce the risk of injury to persons due to fire or explosion. Use
only UL certified power adapters or batteries supplied by the
manufacturer or authorized retailers.
• Do not disable or remove the power cord grounding plug, the
grounding is an important safety feature.
• Ensure to plug the power cord into a grounded (earthed) electrical
outlet that is easily accessible at all times.