User Manual
Table Of Contents
- About this manual
- Chapter 1: Getting to know your Embedded Computer
- Chapter 2: Using your Embedded Computer
- Chapter 3: Upgrading your Embedded Computer
- 3.1 Removing the bottom cover
- 3.2 Replacing the bottom cover
- 3.3 Installing memory modules
- 3.4 Installing 2.5-inch storage device
- 3.5 Installing an M.2 SSD
- 3.6 Installing a nano SIM card
- 3.7 Installing a wireless card to the M.2 (E-key) slot
- 3.8 Installing an M.2 B-key module
- 3.9 Installing antennas (optional)
- 3.10 Installing wall mount brackets (optional)
- 3.11 Installing the VESA mount (optional)
- Chapter 4: Watchdog Timer
- Appendix
40
2.1 Getting started
2.1.1 Connect the AC power adapter to your
Embedded Computer
To connect the AC power adapter to your Embedded Computer:
A. Connect the power cord to the AC power adapter.
B. Connect the DC power connector to your Embedded Computer’s
power (DC) input.
C. Plug the AC power adapter into a 100 V - 240 V power source.