User Manual
Table Of Contents
- About this manual
- Chapter 1: Getting to know your Embedded Computer
- Chapter 2: Using your Embedded Computer
- Chapter 3: Upgrading your Embedded Computer
- 3.1 Removing the bottom cover
- 3.2 Replacing the bottom cover
- 3.3 Installing memory modules
- 3.4 Installing 2.5-inch storage device
- 3.5 Installing an M.2 SSD
- 3.6 Installing a nano SIM card
- 3.7 Installing a wireless card to the M.2 (E-key) slot
- 3.8 Installing an M.2 B-key module
- 3.9 Installing antennas (optional)
- 3.10 Installing wall mount brackets (optional)
- 3.11 Installing the VESA mount (optional)
- Chapter 4: Watchdog Timer
- Appendix
17
Jumpers Page
1. Clear RTC RAM jumper 19
2. Display Panel VCC Power Selection jumper 20
3. COM +5V/+12V Selection jumper 20
4. AT/ATX Mode Conīguration jumper 21
Connectors/slots Page
1. M.2 (E-key) Wi-Fi slot 22
2. M.2 (B-key) slot 23
3. Battery connector 24
4. LVDS connector 25
5. M.2 (M-key) slot 24
6. Backlight Inverter Power connector 26
7. Serial Port connector 27
8. Chassis intrusion connector 28
9. DIMM slot 18
10. COM Debug connector 29
11. Fan connector 29
12. Nano SIM Card slot 30
13. USB 2.0 connector 31
14. SATA Power connector 32
15. DC-in Power connector 33
16. SATA connector 32
17. I2C connector 33
18. SMBus connector 34
19. SPI TPM connector 34
20. GPIO connector 35
21. Power Button connector 35
22. Stereo Out connector 36
23. System Panel connector 37
24. Line Out / Mic connector 38