User Manual
Table Of Contents
- About this manual
- Chapter 1: Getting to know your Embedded Computer
- Chapter 2: Using your Embedded Computer
- Chapter 3: Upgrading your Embedded Computer
- 3.1 Removing the bottom cover
- 3.2 Replacing the bottom cover
- 3.3 Installing memory modules
- 3.4 Installing 2.5-inch storage device
- 3.5 Installing an M.2 SSD
- 3.6 Installing a nano SIM card
- 3.7 Installing a wireless card to the M.2 (E-key) slot
- 3.8 Installing an M.2 B-key module
- 3.9 Installing antennas (optional)
- 3.10 Installing wall mount brackets (optional)
- 3.11 Installing the VESA mount (optional)
- Chapter 4: Watchdog Timer
- Appendix
10
1.1 Features
1.1.1 Front view
Functional Earth Ground (on selected models)
The Functional Earth Ground provides you with a
grounding point.
System reset pinhole
The hard reset pinhole allows you to reboot your
Embedded Computer.
Power indicator
The power indicator lights up when your Embedded
Computer is turned on and blinks slowly when in sleep
mode.
Drive activity indicator
This indicator lights up when your Embedded Computer is
accessing the internal storage drive.