User Manual

Report No. ASL23051710
7 - 95
Universal Standard Service, Inc.
Mass of equipment (kg) ............................................ :
Max. 1.84 kg
POSSIBLE TEST CASE VERDICTS:
- test case does not apply to the test object ................. :
N/A
- test object does meet the requirement ...................... :
P (Pass)
- test object does not meet the requirement ................ :
F (Fail)
TESTING:
Date of receipt of test item ............................................ :
2023-05-17
Date (s) of performance of tests ................................... :
2023-05-23 to 2023-06-07
GENERAL REMARKS:
"(See Enclosure #)" refers to additional information appended to the report.
"(See appended table)" refers to a table appended to the report.
Throughout this report a comma / point is used as the decimal separator.
When differences exist; they shall be identified in the General product information section.
Name and address of factory (ies) .......................... :
(1) AMERTEK COMPUTER (SHENZHEN) CO LTD
3-4F Bldg 30 Shatoujiao Free Trade Zone No 2015
Shenyan Rd Haishan St Yantian District Shenzhen
518081 Guangdong CN
(2) PRIME TECHNOLOGY (GUANGZHOU) INC
19 BAOYING NAN RD GUANGZHOU FREE
TRADE GUANGZHOU GUANGDONG 510730
CHINA
GENERAL PRODUCT INFORMATION:
Product Description –
Electrical components are mounted on PCB, which is enclosed by metal enclosure (fixed by screws) and
accompanied with six USB ports, one HDMI port, one DP port, two RJ-45 ports, six COM ports (Two of them
can be replaced by CANBUS board COM port), six antenna connectors and two AUDIO ports.
Overall dimension drawing: 186.0 mm x 135.0 mm x 62.0 mm
Model Differences –
EBS-S100, EBS-S100YYYYYYYYYYYYYYYYYYY (Y =0-9, A-Z, a-z, - or blank, for marketing purpose and no
impact safety related construction and critical components)
All models are identical to each other except for model designation.
Additional Information –
The product has been additionally evaluated and considered in compliance with standard BS EN 62368-1:2014
+ A11:2017, content of UK compliance refers to European Group Differences.
Technical Considerations –
The location was investigated as a limited power source (LPS): All output ports.
The following are available from the Applicant upon request: Installation (Safety) Instructions / Manual.