User Manual

Report No. ASL23051710
60 - 95
Universal Standard Service, Inc.
components); @=Tests were repeated 2 more times (Totally 3 times) and get the same result; I/P=Input;
O/P=Output, NSF=No Ignition; TC=Touch Current measured; ASRE=All Safeguards remain effective
Annex M
TABLE: Batteries
P
The tests of Annex M are applicable only when appropriate battery data is not available
--
Is it possible to install the battery in a reverse polarity position? ......................... :
No
--
Non-rechargeable batteries
Rechargeable batteries
Discharging
Un-
intentional
charging
Charging
Discharging
Reversed charging
Meas.
current
Manuf.
Specs.
Meas.
current
Manuf.
Specs.
Meas.
current
Manuf.
Specs.
Meas.
current
Manuf.
Specs.
Max. current
during normal
condition
--
--
0.01mA
--
--
--
--
--
--
Max. current
during fault
condition, SD1
(pin1-2) short
--
--
3.28mA
--
--
--
--
--
--
Max. current
during fault
condition, SD1
(pin2-3) short
--
--
3.01mA
--
--
--
--
--
--
Max. current
during fault
condition,
SR14 short
--
--
0.01mA
--
--
--
--
--
--
Test results:
Yes/No
Verdict
- Chemical leaks
No
P
- Explosion of the battery
No
P
- Emission of flame or expulsion of molten metal
No
P
- Electric strength tests of equipment after completion of tests
--
N/A
Supplementary information:
SR14=1kΩ
Annex M.4
Table: Additional safeguards for equipment containing secondary lithium
batteries
N/A
Battery/Cell
No.
Test conditions
Measurements
Observation
U
I (A)
Temp (C)
Supplementary Information: