User Manual

Report No. ASL23051710
54 - 95
Universal Standard Service, Inc.
5.6.6.2
TABLE: Resistance of protective conductors and terminations
N/A
Accessible part
Test current
(A)
Duration
(min)
Voltage drop
(V)
Resistance
(Ω)
Supplementary information:
5.7.2.2,
5.7.4
TABLE: Earthed accessible conductive part
N/A
Supply voltage ............................................................. :
—
Location
Test conditions specified in 6.1 of
IEC 60990 or Fault Condition No
in IEC 60990 clause 6.2.2.1
through 6.2.2.8, except for 6.2.2.7
Touch current
(mA)
1
2*
3
4
5
6
8
Supplementary Information:
Notes:
[1] Supply voltage is the anticipated maximum Touch Voltage
[2] Earthed neutral conductor [Voltage differences less than 1% or more]
[3] Specify method used for measurement as described in IEC 60990 sub-clause 4.3
[4] IEC60990, sub-clause 6.2.2.7, Fault 7 not applicable.
[5] (*) IEC60990, sub-clause 6.2.2.2 is not applicable if switch or disconnect device (e.g., appliance coupler)
provided.
6.2.2
Table: Electrical power sources (PS) measurements for classification
P
Source
Description
Measurement
Max Power after 3
s
Max Power after 5
s*
)
PS
Classification
Power button
(F_PANEL) pin6
to GND
Load fault
Power (W) :
0
--
PS1
V
A
(V) :
3.28Vdc
--
I
A
(A) :
0
--
Antenna
connector 1
Load fault
Power (W) :
0
--
PS1
V
A
(V) :
0Vdc
--