User Manual

Report No. ASL23051710
53 - 95
Universal Standard Service, Inc.
5.4.4.2,
5.4.4.5 c)
5.4.4.9
TABLE: Distance through insulation measurements
N/A
Distance through
insulation di at/of:
Peak voltage
(V)
Frequency
(kHz)
Material
Required DTI
(mm)
DTI
(mm)
Supplementary information:
5.4.9
TABLE: Electric strength tests
N/A
Test voltage applied between:
Voltage shape
(AC, DC)
Test voltage (V)
Breakdown
Yes / No
Functional:
Basic/supplementary:
Reinforced:
Routine Tests:
Supplementary information:
5.5.2.2
TABLE: Stored discharge on capacitors
N/A
Supply Voltage (V), Hz
Test
Location
Operating
Condition
(N, S)
Switch
position
On or off
Measured Voltage
(after 2 seconds)
ES Classification
Supplementary information:
X-capacitors installed for testing are:
☐ bleeding resistor rating:
☐ ICX:
Notes:
A. Test Location:
Phase to Neutral; Phase to Phase; Phase to Earth; and/or Neutral to Earth
B. Operating condition abbreviations:
N – Normal operating condition (e.g., normal operation, or open fuse); S –Single fault condition