User Manual

Report No. ASL23051710
39 - 95
Universal Standard Service, Inc.
EN 62368-1
Clause
Requirement + Test
Result - Remark
Verdict
S.2
Flammability test for fire enclosure and fire barrier
integrity
N/A
Samples, material ............................................... :
⎯
Wall thickness (mm) ............................................ :
⎯
Conditioning (C) ................................................. :
⎯
Test flame according to IEC 60695-11-5 with
conditions as set out
N/A
Test specimen does not show any additional hole
N/A
S.3
Flammability test for the bottom of a fire enclosure
N/A
Samples, material ............................................... :
⎯
Wall thickness (mm) ............................................ :
⎯
Cheesecloth did not ignite
N/A
S.4
Flammability classification of materials
N/A
S.5
Flammability test for fire enclosure materials of
equipment with a steady-state power exceeding
4000 W
N/A
Samples, material ............................................... :
⎯
Wall thickness (mm) ............................................ :
⎯
Conditioning (test condition), (C) ....................... :
⎯
Test flame according to IEC 60695-11-20 with
conditions as set out
N/A
After every test specimen was not consumed
completely
N/A
After fifth flame application, flame extinguished
within 1 min
N/A
T
MECHANICAL STRENGTH TESTS
P
T.1
General requirements
P
T.2
Steady force test, 10 N ...................................... :
N/A
T.3
Steady force test, 30 N ...................................... :
(See appended table T.3)
P
T.4
Steady force test, 100 N .................................... :
N/A
T.5
Steady force test, 250 N .................................... :
(See appended table T.5)
P
T.6
Enclosure impact test
(See appended table T.6)
P
Fall test
P
Swing test
N/A
T.7
Drop test ............................................................ :
N/A