User Manual

Report No. ASL23051710
36 - 95
Universal Standard Service, Inc.
EN 62368-1
Clause
Requirement + Test
Result - Remark
Verdict
M.4.2.2a)
Charging voltage, current and temperature ....... :
⎯
M.4.2.2 b)
Single faults in charging circuitry ........................ :
⎯
M.4.3
Fire Enclosure
N/A
M.4.4
Endurance of equipment containing a secondary
lithium battery
N/A
M.4.4.2
Preparation
N/A
M.4.4.3
Drop and charge/discharge function tests
N/A
Drop
N/A
Charge
N/A
Discharge
N/A
M.4.4.4
Charge-discharge cycle test
N/A
M.4.4.5
Result of charge-discharge cycle test
N/A
M.5
Risk of burn due to short circuit during carrying
N/A
M.5.1
Requirement
N/A
M.5.2
Compliance and Test Method (Test of P.2.3)
N/A
M.6
Prevention of short circuits and protection from
other effects of electric current
N/A
M.6.1
Short circuits
N/A
M.6.1.1
General requirements
N/A
M.6.1.2
Test method to simulate an internal fault
N/A
M.6.1.3
Compliance (Specify M.6.1.2 or alternative
method) .............................................................. :
N/A
M.6.2
Leakage current (mA) ........................................ :
N/A
M.7
Risk of explosion from lead acid and NiCd
batteries
N/A
M.7.1
Ventilation preventing explosive gas concentration
N/A
M.7.2
Compliance and test method
N/A
M.8
Protection against internal ignition from external
spark sources of lead acid batteries
N/A
M.8.1
General requirements
N/A
M.8.2
Test method
N/A
M.8.2.1
General requirements
N/A
M.8.2.2
Estimation of hypothetical volume Vz (m
3
/s) ....... :
⎯
M.8.2.3
Correction factors ................................................ :
⎯
M.8.2.4
Calculation of distance d (mm) ........................... :
⎯
M.9
Preventing electrolyte spillage
N/A