User Manual

Report No. ASL23051710
34 - 95
Universal Standard Service, Inc.
EN 62368-1
Clause
Requirement + Test
Result - Remark
Verdict
D2)
Capacitance ........................................................ :
⎯
D3)
Resistance .......................................................... :
⎯
H
CRITERIA FOR TELEPHONE RINGING SIGNALS
N/A
H.1
General
N/A
H.2
Method A
N/A
H.3
Method B
N/A
H.3.1
Ringing signal
N/A
H.3.1.1
Frequency (Hz) ................................................... :
⎯
H.3.1.2
Voltage (V) .......................................................... :
⎯
H.3.1.3
Cadence; time (s) and voltage (V) ...................... :
⎯
H.3.1.4
Single fault current (mA): ..................................... :
⎯
H.3.2
Tripping device and monitoring voltage .............. :
N/A
H.3.2.1
Conditions for use of a tripping device or a
monitoring voltage complied with
N/A
H.3.2.2
Tripping device
N/A
H.3.2.3
Monitoring voltage (V) ......................................... :
⎯
J
INSULATED WINDING WIRES FOR USE WITHOUT INTERLEAVED INSULATION
N/A
General requirements
N/A
K
SAFETY INTERLOCKS
N/A
K.1
General requirements
N/A
K.2
Components of safety interlock safeguard
mechanism ........................................................
N/A
K.3
Inadvertent change of operating mode
N/A
K.4
Interlock safeguard override
N/A
K.5
Fail-safe
N/A
Compliance ........................................................ :
N/A
K.6
Mechanically operated safety interlocks
N/A
K.6.1
Endurance requirement
N/A
K.6.2
Compliance and Test method ............................ :
N/A
K.7
Interlock circuit isolation
N/A
K.7.1
Separation distance for contact gaps & interlock
circuit elements (type and circuit location) ........ :
N/A