User Manual

Report No. ASL23051710
33 - 95
Universal Standard Service, Inc.
EN 62368-1
Clause
Requirement + Test
Result - Remark
Verdict
G.13.4
Insulation between conductors on the same inner
surface
N/A
Compliance with cemented joint requirements
(Specify construction) .......................................... :
⎯
G.13.5
Insulation between conductors on different
surfaces
N/A
Distance through insulation ................................. :
N/A
Number of insulation layers (pcs) ....................... :
⎯
G.13.6
Tests on coated printed boards
N/A
G.13.6.1
Sample preparation and preliminary inspection
N/A
G.13.6.2a)
Thermal conditioning
N/A
G.13.6.2b)
Electric strength test
N/A
G.13.6.2c)
Abrasion resistance test
N/A
G.14
Coating on components terminals
N/A
G.14.1
Requirements .................................................... :
N/A
G.15
Liquid filled components
N/A
G.15.1
General requirements
N/A
G.15.2
Requirements
N/A
G.15.3
Compliance and test methods
N/A
G.15.3.1
Hydrostatic pressure test
N/A
G.15.3.2
Creep resistance test
N/A
G.15.3.3
Tubing and fittings compatibility test
N/A
G.15.3.4
Vibration test
N/A
G.15.3.5
Thermal cycling test
N/A
G.15.3.6
Force test
N/A
G.15.4
Compliance
N/A
G.16
IC including capacitor discharge function (ICX)
N/A
a)
Humidity treatment in accordance with sc5.4.8 –
120 hours
N/A
b)
Impulse test using circuit 2 with Uc = to transient
voltage ................................................................ :
N/A
C1)
Application of ac voltage at 110% of rated voltage
for 2.5 minutes
N/A
C2)
Test voltage ........................................................ :
⎯
D1)
10,000 cycles on and off using capacitor with
smallest capacitance resistor with largest
resistance specified by manufacturer
N/A