User Manual

Report No. ASL23051710
32 - 95
Universal Standard Service, Inc.
EN 62368-1
Clause
Requirement + Test
Result - Remark
Verdict
G.8.3.2
Varistor overload test .......................................... :
N/A
G.8.3.3
Temporary overvoltage ....................................... :
N/A
G.9
Integrated Circuit (IC) Current Limiters
P
G.9.1 a)
Manufacturer defines limit at max. 5A.
Approved IC used.
P
G.9.1 b)
Limiters do not have manual operator or reset
P
G.9.1 c)
Supply source does not exceed 250 VA ............ :
See appended table 4.1.2.
⎯
G.9.1 d)
IC limiter output current (max. 5A) ...................... :
See appended table 4.1.2.
⎯
G.9.1 e)
Manufacturers’ defined drift ................................ :
Considered.
⎯
G.9.2
Test Program 1
N/A
G.9.3
Test Program 2
Refer to CB report of Power
Distribution Switch.
P
G.9.4
Test Program 3
N/A
G.10
Resistors
N/A
G.10.1
General requirements
N/A
G.10.2
Resistor test
N/A
G.10.3
Test for resistors serving as safeguards between
the mains and an external circuit consisting of a
coaxial cable
N/A
G.10.3.1
General requirements
N/A
G.10.3.2
Voltage surge test
N/A
G.10.3.3
Impulse test
N/A
G.11
Capacitor and RC units
N/A
G.11.1
General requirements
N/A
G.11.2
Conditioning of capacitors and RC units
N/A
G.11.3
Rules for selecting capacitors
N/A
G.12
Optocouplers
N/A
Optocouplers comply with IEC 60747-5-5:2007
Spacing or Electric Strength Test (specify option
and test results) .................................................. :
N/A
Type test voltage Vini ......................................... :
⎯
Routine test voltage, Vini,b ................................. :
⎯
G.13
Printed boards
N/A
G.13.1
General requirements
N/A
G.13.2
Uncoated printed boards
N/A
G.13.3
Coated printed boards
N/A