User Manual

Report No. ASL23051710
30 - 95
Universal Standard Service, Inc.
EN 62368-1
Clause
Requirement + Test
Result - Remark
Verdict
Temperature (C) ................................................ :
⎯
G.5.2.3
Wound Components supplied by mains
N/A
G.5.3
Transformers
N/A
G.5.3.1
Requirements applied (IEC61204-7, IEC61558-1/-
2, and/or IEC62368-1) ......................................... :
N/A
Position ................................................................ :
⎯
Method of protection ........................................... :
⎯
G.5.3.2
Insulation
N/A
Protection from displacement of windings ........... :
⎯
G.5.3.3
Overload test ...................................................... :
N/A
G.5.3.3.1
Test conditions
N/A
G.5.3.3.2
Winding Temperatures testing in the unit
N/A
G.5.3.3.3
Winding Temperatures - Alternative test method
N/A
G.5.4
Motors
N/A
G.5.4.1
General requirements
N/A
Position ............................................................... :
⎯
G.5.4.2
Test conditions
N/A
G.5.4.3
Running overload test
N/A
G.5.4.4
Locked-rotor overload test
N/A
Test duration (days) ........................................... :
⎯
G.5.4.5
Running overload test for d.c. motors in secondary
circuits
N/A
G.5.4.5.2
Tested in the unit
N/A
Electric strength test (V) ...................................... :
⎯
G.5.4.5.3
Tested on the Bench - Alternative test method;
test time (h) ......................................................... :
N/A
Electric strength test (V) ...................................... :
⎯
G.5.4.6
Locked-rotor overload test for d.c. motors in
secondary circuits
N/A
G.5.4.6.2
Tested in the unit
N/A
Maximum Temperature ...................................... :
N/A
Electric strength test (V) ..................................... :
N/A
G.5.4.6.3
Tested on the bench - Alternative test method; test
time (h) ................................................................ :
N/A
Electric strength test (V) ...................................... :
N/A