User Manual

Report No. ASL23051710
22 - 95
Universal Standard Service, Inc.
EN 62368-1
Clause
Requirement + Test
Result - Remark
Verdict
8.6.5
Horizontal force test (Applied Force) ..................... :
N/A
Position of feet or movable parts ............................ :
⎯
8.7
Equipment mounted to wall or ceiling
P
8.7.1
Mounting Means (Length of screws (mm) and
mounting surface) .................................................. :
See Enclosure 2-02 to 2-03 for
Mounting Bracket dimension in
details.
P
8.7.2
Direction and applied force ..................................... :
For test 1:
Weight of the equipment is 1.84kg.
Additional force (5.52 kg) is applied
downwards through the centre of
gravity of the equipment for 1min.
And a horizontal force (50 N) is
applied laterally for 60 sec.
For Test 3:
Metal screw (Ø 2.9mm) for
attachment of the mounting means.
Each threaded part were subjected to
five cycles of loosening and
tightening using the specified torque
(0.5 Nm) and the corresponding
threaded fastener. The threaded
parts did not become dislodged and
remained mechanically intact.
P
8.8
Handles strength
N/A
8.8.1
Classification
N/A
8.8.2
Applied Force ......................................................... :
N/A
8.9
Wheels or casters attachment requirements
N/A
8.9.1
Classification
N/A
8.9.2
Applied force ........................................................... :
⎯
8.10
Carts, stands and similar carriers
N/A
8.10.1
General
N/A
8.10.2
Marking and instructions
N/A
Instructional Safeguard ........................................... :
⎯
8.10.3
Cart, stand or carrier loading test and compliance
N/A
Applied force ........................................................... :
⎯
8.10.4
Cart, stand or carrier impact test
N/A
8.10.5
Mechanical stability
N/A
Applied horizontal force (N) .................................... :
⎯