User Manual

Report No. ASL23051710
16 - 95
Universal Standard Service, Inc.
EN 62368-1
Clause
Requirement + Test
Result - Remark
Verdict
5.4.6
Insulation of internal wire as part of supplementary
safeguard ........................................................... :
N/A
5.4.7
Tests for semiconductor components and for
cemented joints
N/A
5.4.8
Humidity conditioning
N/A
Relative humidity (%) ........................................ :
⎯
Temperature (°C) ............................................... :
⎯
Duration (h) ....................................................... :
⎯
5.4.9
Electric strength test .......................................... :
N/A
5.4.9.1
Test procedure for a solid insulation type test
N/A
5.4.9.2
Test procedure for routine tests
N/A
5.4.10
Protection against transient voltages between
external circuit
N/A
5.4.10.1
Parts and circuits separated from external circuits
N/A
5.4.10.2
Test methods
N/A
5.4.10.2.1
General
N/A
5.4.10.2.2
Impulse test ....................................................... :
N/A
5.4.10.2.3
Steady-state test................................................ :
N/A
5.4.11
Insulation between external circuits and earthed
circuitry .............................................................. :
N/A
5.4.11.1
Exceptions to separation between external circuits
and earth
N/A
5.4.11.2
Requirements
N/A
Rated operating voltage U
op
(V) ........................ :
⎯
Nominal voltage U
peak
(V)................................... :
⎯
Max increase due to variation U
sp
...................... :
⎯
Max increase due to ageing U
sa
..................... :
⎯
U
op
= U
peak
+  U
sp
+ U
sa
.................................... :
⎯
5.5
Components as safeguards
N/A
5.5.1
General
N/A
5.5.2
Capacitors and RC units
N/A
5.5.2.1
General requirement
N/A
5.5.2.2
Safeguards against capacitor discharge after
disconnection of a connector ............................. :
N/A
5.5.3
Transformers
N/A
5.5.4
Optocouplers
N/A