User Manual
Report No. ASL23051710
14 - 95
Universal Standard Service, Inc.
EN 62368-1
Clause
Requirement + Test
Result - Remark
Verdict
5
ELECTRICALLY-CAUSED INJURY
P
5.2.1
Electrical energy source classifications .............. :
See Energy source identification and
classification table.
P
5.2.2
ES1, ES2 and ES3 limits
P
5.2.2.2
Steady-state voltage and current ........................ :
N/A
5.2.2.3
Capacitance limits ................................................ :
N/A
5.2.2.4
Single pulse limits ................................................ :
N/A
5.2.2.5
Limits for repetitive pulses ................................... :
N/A
5.2.2.6
Ringing signals ................................................... :
N/A
5.2.2.7
Audio signals ....................................................... :
N/A
5.3
Protection against electrical energy sources
N/A
5.3.1
General Requirements for accessible parts to
ordinary, instructed and skilled persons
N/A
5.3.2.1
Accessibility to electrical energy sources and
safeguards
N/A
5.3.2.2
Contact requirements
N/A
a) Test with test probe from Annex V.................. :
N/A
b) Electric strength test potential (V) ................... :
N/A
c) Air gap (mm) ................................................... :
N/A
5.3.2.4
Terminals for connecting stripped wire
N/A
5.4
Insulation materials and requirements
N/A
5.4.1.2
Properties of insulating material
N/A
5.4.1.3
Humidity conditioning ........................................ :
N/A
5.4.1.4
Maximum operating temperature for insulating
materials .............................................................. :
N/A
5.4.1.5
Pollution degree ................................................... :
2
⎯
5.4.1.5.2
Test for pollution degree 1 environment and for an
insulating compound
N/A
5.4.1.5.3
Thermal cycling
N/A
5.4.1.6
Insulation in transformers with varying dimensions
N/A
5.4.1.7
Insulation in circuits generating starting pulses
N/A
5.4.1.8
Determination of working voltage
N/A
5.4.1.9
Insulating surfaces
N/A
5.4.1.10
Thermoplastic parts on which conductive metallic
parts are directly mounted
N/A
5.4.1.10.2
Vicat softening temperature ................................ :
N/A