User Manual
Table Of Contents
- About this manual
- Chapter 1: Getting to know your Embedded Computer
- Chapter 2: Using your Embedded Computer
- Chapter 3: Upgrading your Embedded Computer
- 3.1 Removing the bottom cover
- 3.2 Replacing the bottom cover
- 3.3 Installing memory modules
- 3.4 Installing 2.5” storage device
- 3.5 Installing an M.2 SSD
- 3.6 Installing a nano SIM card
- 3.7 Installing a wireless card to the M.2 (E-key) slot
- 3.8 Installing an mPCIe / mSATA module
- 3.9 Installing antennas (optional)
- 3.10 Installing wall mount brackets (optional)
- 3.11 Installing the VESA mount (optional)
- 3.12 Installing DIN rail clips (optional)
- Chapter 4: Watchdog Timer
- Appendix
17
Jumpers Page
1. Clear RTC RAM jumper 19
2. Display Panel VCC Power Selection jumper 20
3. COM +5V/+12V Selection jumper 20
4. AT/ATX Mode Configuration jumper 21
Connectors/slots Page
1. M.2 (E-key) Wi-Fi slot 25
2. Mini PCIe slot 23
3. Battery connector 26
4. M.2 (M-key) slot 24
5. DIMM slot 18
6. Nano SIM Card slot 25
7. GPIO connector 27
8. SATA connector 22
9. SATA Power connector 22
10. I2C connector 28
11. SMBus connector 27
12. SPI TPM connector 29
13. Power Button connector 26