User Manual
Table Of Contents
- About this manual
- Chapter 1: Getting to know your Embedded Computer
- Chapter 2: Using your Embedded Computer
- Chapter 3: Upgrading your Embedded Computer
- Chapter 4: Watchdog Timer
- Appendix
22
3. Serial Port connector
The Serial (COM) Port connector allows you to connect a serial port
cable. Connect the serial port cable to this connector, then install the
serial port to a slot opening on the system chassis.
Connector type
BOX header 2x10p, K10, 1.0mm pitch
NOTE:
• The serial port cable is purchased separately.
• COM1 and COM2 support RS-232/422/485.