User Manual
Table Of Contents
- Safety information
- About this guide
- Chapter 1
- Chapter 2
- Chapter 3
- BIOS setup
- 3.1 BIOS setup program
- 3.2 Main menu
- 3.3 Advanced menu
- 3.3.1 PCH-FW Configuration
- 3.3.2 Trusted Computing
- 3.3.3 CPU Configuration
- 3.3.4 Graphics Configuration
- 3.3.5 PCI Express Configuration
- 3.3.6 CSM Configuration
- 3.3.7 Super IO Configuration
- 3.3.8 Serial Console Redirection
- 3.3.9 SATA Configuration
- 3.3.10 Network Stack Configuration
- 3.3.11 USB Configuration
- 3.3.12 NVMe Configuration
- 3.3.13 Onboard Devices Configuration
- 3.3.14 Miscellaneous
- 3.3.15 APM Configuration
- 3.3.16 EzFlash
- 3.3.17 Watchdog Timer
- 3.4 Hardware Monitor menu
- 3.5 Security menu
- 3.6 Boot menu
- 3.7 Exit menu
- Appendix
- BIOS setup
3-14
ASUS EBS-A700
3.3.15 APMConguration
ErP Ready
Allows you to switch off some power at S5 to get the system ready for ErP
requirement. When set to [Enabled], all other PME options will be switched off.
Conguration options: [Disabled] [Enabled]
Restore AC Power Loss
[S5 State] The system goes into off state after an AC power loss.
[S0 State] The system goes into on state after an AC power loss.
Power On By PCIE/PCI
This item allows you to enable or disable the Wake-on-LAN function of the onboard
LAN controller or other installed PCIe/PCI LAN cards. Conguration options:
[Disabled] [Enabled]
Power On By PS2
Enables or disables the system to be powered on by a PS/2 keyboard or mouse.
Conguration options: [Disabled] [Enabled]
Power On By Ring
[Enabled] Enables the Ring devices to generate a wake event.
[Disabled] Disables the Ring devices to generate a wake event.
Power On By RTC
[Disabled] Disables RTC to generate a wake event.
[Single event] Allows you to generate a single wake event.
[Daily event] Allows you to generate a daily wake event.
[Weekly event] Allows you to generate a weekly wake event.
[Monthly event] Allows you to generate a monthly wake event.
3.3.16 EzFlash
Enter Ez-Flash mode
This item allows you to run EzFlash utility. When you press <Enter>, a conrmation
message appears. Use the left/right arrow key to select between [Yes] or [No],
then press <Enter> to conrm your choice.
3.3.17 Watchdog Timer
Watchdog Support
This item allows you to enable or disable Watchdog timer. Conguration options:
[Enabled] [Disabled]
The following items appear when you set Watchdog Support to [Enabled].