User Manual

3-13
Chapter 3: BIOS setup
USB5-9, 14
Allows you to enable or disable USB port. Once set to [Disabled], any USB
devices plugged into the connector will not be detected by BIOS or OS.
Conguration options: [Disabled] [Enabled]
3.3.12 NVMeConguration
The NVMe Conguration menu displays the NVMe controller and drive information
of the devices connected and allows you to congure NVMe device options
settings.
3.3.13 OnboardDevicesConguration
HD Audio
[Enabled] Enables the HD Audio Device.
[Disabled] Disables the HD Audio Device.
LAN1 I210AT
[Enabled] Enables the Intel LAN1 controller.
[Disabled] Disables the controller.
LAN2 I219V
[Enabled] Enables the Intel LAN2 controller.
[Disabled] Disables the controller.
M.2 Key
PCIE Port
[Enabled] Enables the PCIE port.
[Disabled] Disables the PCIE port.
I2C Controller
[Enabled] Enables the I2C controller.
[Disabled] Disables the I2C controller.
3.3.14 Miscellaneous
DMI/OPIConguration
DMI LINK ASPM Control
This item allows you to control the Active State Power Management on SA side
of the DMI Link. Conguration options: [Disabled] [Auto] [ASPM L0s] [ASPM L1]
[ASPM L0sL1]
PCIExpressConguration
DMI Link ASPM Control
This item allows you to control the Active State Power Management of the DMI
Link. Conguration options: [Disabled] [L1] [Auto]