User Manual

3-7
Chapter 3: BIOS setup
ASPM
This item allows you to control the Active State Power Management on
both NB (NorthBridge) side and SB (SouthBridge) side of the DMI Link.
Conguration options: [Disabled] [L1] [Auto]
L1 Substates
This item allows you to select the PCI Express L1 Substates settings.
Conguration options: [Disabled] [L1.1] [L1.1 & L1.2]
PCIe Speed
Congures the speed of PCIEx16 (G3) slot. Conguration options: [Auto]
[Gen1] [Gen2] [Gen3]
Detect Timeout
Allows you to set the time (milliseconds) of waiting for link to exit Detect state
for enabled ports before assuming there is no device and potentially disabling
the port. Use the <+> and <-> keys to adjust the value or input the desired
value.
Hot Plug
These items allow you to enable/disable PCIEX16 (G3) slot Hot Plug support.
Conguration options: [Disabled] [Enabled]
Detect Non-Compliance Device
Allows you to enable or disable the detection function of non-compliance PCI
Express device. Conguration options: [Disabled] [Enabled]
PCIEX1 (G3) Slot
PCIEx1 (G3) Slot
This item allows you to enable or disable the PCIEx1 (G3) slot. Conguration
options: [Disabled] [Enabled]
ASPM
This item allows you to control the Active State Power Management on
both NB (NorthBridge) side and SB (SouthBridge) side of the DMI Link.
Conguration options: [Disabled] [L1] [Auto]
L1 Substates
This item allows you to select the PCI Express L1 Substates settings.
Conguration options: [Disabled] [L1.1] [L1.1 & L1.2]
PCIe Speed
Congures the speed of PCIEx1 (G3) slot. Conguration options: [Auto]
[Gen1] [Gen2] [Gen3]
Detect Timeout
Allows you to set the time (milliseconds) of waiting for link to exit Detect state
for enabled ports before assuming there is no device and potentially disabling