User Manual

3-14
H610A-IM-A
3.3.16 EzFlash
Enter Ez-Flash mode
This item allows you to run EzFlash utility. When you press <Enter>, a conrmation message
appears. Use the left/right arrow key to select between [Yes] or [No], then press <Enter> to
conrm your choice.
3.3.17 Watchdog Timer
Watchdog Support
This item allows you to enable or disable Watchdog timer. Conguration options: [Enabled]
[Disabled]
The following items appear when you set Watchdog Support to [Enabled].
Watchdog Count mode
Allows you to select Watchdog Timer I count mode.
Conguration options: [Second Mode] [Minute Mode]
Watchdog Timer
Use the <+> and <-> keys to adjust the value or input the desired value directly. The value
ranges from 1 to 255.
3.4 Hardware Monitor menu
The items in this menu provide you an overview of system status including temperature, fan
speed and voltage, and allow you to congure the smart fan.
Smart Fan Mode
Allows you to select the smart fan mode. Conguration options: [Disabled] [Normal] [Manual
Mode]
The following item appears only when you set Smart Fan Mode to [Manual Mode].
Smart Fan Function
Chassis Fan1/2 Setting
Temperature 1(~4)
Allows you to set the value of temperature1(~4).
FD/RPM 1(~4)
Allows you to set the value of Fan Duty/PRM 1(~4) when temperature is T1(~4).
CPU Fan Setting
Temperature 1(~4)
Allows you to set the value of temperature1(~4).
FD/RPM 1(~4)
Allows you to set the value of Fan Duty/PRM 1(~4) when temperature is T1(~4).