User Manual
Table Of Contents
- Notices
- Safety information
- Chapter 1
- Chapter 3
- BIOS setup
- 3.1 BIOS Setup program
- 3.2 Main menu
- 3.3 Advanced menu
- 3.3.1 PCH-FW Configuration
- 3.3.2 Trusted Computing
- 3.3.3 CPU Configuration
- 3.3.4 Graphics Configuration
- 3.3.5 PCI Express Configuration
- 3.3.6 AMT Configuration
- 3.3.7 CSM Configuration
- 3.3.8 Super IO Configuration
- 3.3.9 Serial Console Redirection
- 3.3.10 SATA And RST Configuration
- 3.3.11 Network Stack Configuration
- 3.3.12 USB Configuration
- 3.3.13 NVMe Configuration
- 3.3.14 Onboard Devices Configuration
- 3.3.15 EZ-Flash
- 3.3.16 APM Configuration
- 3.3.17 Watchdog Timer
- 3.3.19 Miscellaneous
- 3.4 Hardware Monitor menu
- 3.5 Security menu
- 3.6 Boot menu
- 3.7 Exit menu
- Appendix
- BIOS setup
3-14 Chapter 3: BIOS setup
Conguration options: [80x24] [80x25]
Redirect After POST
Conguration options: [Always Enable] [BootLoader]
[Always Enable] Legacy Console Redirection is enabled for Legacy OS.
[BootLoader] Legacy Console Redirection is disabled before booting
to Legacy OS.
3.3.10 SATA And RST Configuration
This item allows you to congure SATA device options settings.
SATA Controller(s)
Allows you to enables or disables the onboard SATA device. Conguration options:
[Disabled] [Enabled]
The following item appears only when you set SATA Controller(s) to [Enabled].
SATA Mode Selection
Allows you to determine how SATA controller(s) operate. Conguration options: [AHCI] [Intel
RST Premium With Intel Optane System Acceleration]
[AHCI] Set to [AHCI] when you want the SATA hard disk drives to use the
AHCI (Advanced Host Controller Interface). The AHCI allows the
onboard storage driver to enable advanced Serial ATA features that
increases storage performance on random workloads by allowing the
drive to internally optimize the order of commands.
[Intel RST Premium With
Intel Optane System
Acceleration]
Set to [Intel RST Premium With Intel Optane System Acceleration]
when you want to create a RAID conguration from the SATA hard
disk drives.
The following items appear only when you set SATA Mode Selection to [Intel RST
Premium With Intel Optane System Acceleration].
Sata Interrupt Selection
Allows you to select which interrupt will be available to the operating system. This
option only takes effect if SATA controller is in RAID mode. Conguration options:
[Msix] [Msi] [Legacy]