User Manual
Table Of Contents
- Notices
- Safety information
- Chapter 1
- Chapter 3
- BIOS setup
- 3.1 BIOS setup program
- 3.2 Main menu
- 3.3 Advanced menu
- 3.3.1 PCH-FW Configuration
- 3.3.2 Trusted Computing
- 3.3.3 CPU Configuration
- 3.3.4 Graphics Configuration
- 3.3.5 PCI Express Configuration
- 3.3.6 CSM Configuration
- 3.3.7 Super IO Configuration
- 3.3.8 Serial Console Configuration
- 3.3.9 SATA Configuration
- 3.3.10 USB Configuration
- 3.3.11 Onboard Devices Configuration
- 3.3.12 APM Configuration
- 3.3.13 EzFlash
- 3.3.14 Watchdog Timer
- 3.3.15 Network Stack Configuration
- 3.3.16 Miscellaneous
- 3.4 Hardware Monitor menu
- 3.5 Security menu
- 3.6 Boot menu
- 3.7 Exit menu
- Appendix
- BIOS setup
ASUS EBE-4U
3-11
3.3.14 Watchdog Timer
Watchdog Support
This item allows you to enable or disable Watchdog timer. Conguration options: [Enabled]
[Disabled]
Watchdog Timer
Use the <+> and <-> keys to adjust the value or input the desired value directly. The value
ranges from 1 to 255.
3.3.15 Network Stack Configuration
Network Stack
This item allows user to disable or enable the UEFI network stack. Conguration
options: [Disabled] [Enabled]
The following two items appear only when you set the previous item to
[Enabled].
Ipv4 PXE Support
This item allows user to disable or enable the Ipv4 PXE Boot support.
Conguration options: [Disabled] [Enabled]
Ipv6 PXE Support
This item allows user to disable or enable the Ipv6 PXE Boot support.
Conguration options: [Disabled] [Enabled]
3.3.16 Miscellaneous
DMI/OPI Configuration
DMI Link ASPM Control
This item allows you to control the Active State Power Management on SA side of
the DMI Link. Conguration options: [Disabled][L1]
PCI Express Configuration
DMI Link ASPM Control
This item allows you to control the Active State Power Management of the DMI
Link. Conguration options: [Disabled] [Enabled]