User Manual

3-8 Chapter 3: BIOS setup
Serial Port 3 Configuration
Serial Port
Allows you to enable or disable the serial port (COM).Conguration options: [Disabled]
[Enabled]
Serial Port 4 Configuration
Serial Port
Allows you to enable or disable the serial port (COM).Conguration options: [Disabled]
[Enabled]
Parallel Port Conguration
Parallel Port
Allows you to enable or disable the Parallel port (LPT/LPTE).Conguration options: [Disabled]
[Enabled]
The following items appear only when you set Parallel Port to [Enabled].
Change Settings [Auto]
This item allows you to select an optimal setting for Super I/O Device. Conguration options:
[Auto] [IO=378h; IRQ=5] [IO=378h; IRQ=5, 6, 7, 9, 10, 11, 12;] [IO=278h; IRQ=5, 6, 7, 9, 10,
11, 12;] [IO=3BCh; IRQ=5, 6, 7, 9, 10, 11, 12;]
Mode [RS232]
Allows you to select the Parallel Port mode. Conguration options: [STD Printer Mode] [SPP
Mode] [EPP-1.9 and SPP Mode] [EPP-1.7 and SPP Mode] [ECP Mode] [ECP and EPP 1.9
Mode] [ECP and EPP 1.7 Mode]
NCT5104DSEC Super IO Conguration
Serial Port 5/6/7/8 Configuration
Serial Port
Allows you to enable or disable the serial port (COM).Conguration options: [Disabled]
[Enabled]
3.3.8 Serial Console Conguration
COM1~COM8
Console Redirection
Allows you enable or disable the console redirection feature. Conguration options: [Enabled]
[Disabled]
3.3.9 SATA Conguration
SATA6G_1/2/3
Allow you to enable/disable the SATA6G_1/2/3 port. Conguration options: [Disabled]
[Enabled]
Hot Plug
These items allow you to enable/disable SATA Hot Plug support. Conguration options:
[Disabled] [Enabled]