User Manual
Table Of Contents
- Notices
- Safety information
- Chapter 1
- Chapter 3
- BIOS setup
- 3.1 BIOS Setup program
- 3.2 Main menu
- 3.3 Advanced menu
- 3.3.1 PCH-FW Configuration
- 3.3.2 Trusted Computing
- 3.3.3 CPU Configuration
- 3.3.4 Graphics Configuration
- 3.3.5 PCI Express Configuration
- 3.3.6 CSM Configuration
- 3.3.7 Super IO Configuration
- 3.3.8 Serial Console Configuration
- 3.3.9 SATA Configuration
- 3.3.10 USB Configuration
- 3.3.11 Onboard Devices Configuration
- 3.3.12 APM Configuration
- 3.3.13 EzFlash
- 3.3.14 Watchdog Timer
- 3.3.15 Network Stack Configuration
- 3.3.16 Miscellaneous
- 3.4 Hardware Monitor menu
- 3.5 Security menu
- 3.6 Boot menu
- 3.7 Exit menu
- Appendix
- BIOS setup
3-10 Chapter 3: BIOS setup
NCT5104DSEC Super IO Configuration
Serial Port 5/6/7/8 Configuration
Serial Port
Allows you to enable or disable the serial port (COM).
Conguration options: [Disabled] [Enabled]
3.3.8 Serial Console Configuration
COM1~COM8
Console Redirection
Allows you enable or disable the console redirection feature.
Conguration options: [Enabled] [Disabled]
3.3.9 SATA Configuration
SATA6G_1/2/3
Allow you to enable/disable the SATA6G_1/2/3 port.
Conguration options: [Disabled] [Enabled]
Hot Plug
These items allow you to enable/disable SATA Hot Plug support.
Conguration options: [Disabled] [Enabled]
M.2
Allow you to enable/disable the M.2 (SOCKET3).
Conguration options: [Disabled] [Enabled]
3.3.10 USB Configuration
LAN1_U32G1_1/2, LAN2_U32G1_3/4
Allows you to enable or disable USB port. Once set to [Disabled], any USB
devices plugged into the connector will not be detected by BIOS or OS.
Conguration options: [Disabled] [Enabled]
USB5-10
Allows you to enable or disable USB port. Once set to [Disabled], any USB
devices plugged into the connector will not be detected by BIOS or OS.
Conguration options: [Disabled] [Enabled]
3.3.11 Onboard Devices Configuration
I2C1 Controller
This item allows you to enable or disable the Serial IO Controller.
Conguration options: [Enabled] [Disabled]