User Manual
Table Of Contents
- Notices
- Safety information
- Chapter 1
- Chapter 3
- BIOS setup
- 3.1 BIOS Setup program
- 3.2 Main menu
- 3.3 Advanced menu
- 3.3.1 PCH-FW Configuration
- 3.3.2 Trusted Computing
- 3.3.3 CPU Configuration
- 3.3.4 Graphics Configuration
- 3.3.5 PCI Express Configuration
- 3.3.6 CSM Configuration
- 3.3.7 Super IO Configuration
- 3.3.8 Serial Console Configuration
- 3.3.9 SATA Configuration
- 3.3.10 USB Configuration
- 3.3.11 Onboard Devices Configuration
- 3.3.12 APM Configuration
- 3.3.13 EzFlash
- 3.3.14 Watchdog Timer
- 3.3.15 Network Stack Configuration
- 3.3.16 Miscellaneous
- 3.4 Hardware Monitor menu
- 3.5 Security menu
- 3.6 Boot menu
- 3.7 Exit menu
- Appendix
- BIOS setup
3-8 Chapter 3: BIOS setup
Hot Plug
Allow you to enable and disable the PCIEX4 slot Hot Plug support.
Conguration options: [Disabled] [Enabled]
Detect Non-Compliance Device
Allows you to enable or disable the detection function of non-compliance PCI Express
device. Conguration options: [Disabled] [Enabled]
3.3.6 CSM Configuration
CSM Support
Allow you to enable/disable the CSM support.
Conguration options: [Disabled] [Enabled]
Network
Controls the execution of UEFI and Legacy PXE OpROM.
Conguration options: [Do not launch] [UEFI] [Legacy]
Storage
Controls the execution of UEFI and Legacy Storage OpROM.
Conguration options: [Do not launch] [UEFI] [Legacy]
Video
Controls the execution of UEFI and Legacy Video OpROM.
Conguration options: [Do not launch] [UEFI] [Legacy]
Other PCI devices
Determines OpROM execution policy for devices other than Network, Storage, or
Video. Conguration options: [Do not launch] [UEFI] [Legacy]
3.3.7 Super IO Configuration
NCT6116D Super IO Configuration
Serial Port 1 Configuration
Serial Port
Allows you to enable or disable the serial port (COM).
Conguration options: [Disabled] [Enabled]
The following items appear only when you set Serial Port to [Enabled].
COM1 Control
Allows you to select the COM1 mode.
Conguration options: [RS232] [RS422] [RS485]