User Manual
Table Of Contents
- Notices
- Safety information
- Chapter 1
- Chapter 3
- BIOS setup
- 3.1 BIOS Setup program
- 3.2 Main menu
- 3.3 Advanced menu
- 3.3.1 PCH-FW Configuration
- 3.3.2 Trusted Computing
- 3.3.3 CPU Configuration
- 3.3.4 Graphics Configuration
- 3.3.5 PCI Express Configuration
- 3.3.6 CSM Configuration
- 3.3.7 Super IO Configuration
- 3.3.8 Serial Console Redirection
- 3.3.9 SATA Configuration
- 3.3.10 Network Stack Configuration
- 3.3.11 USB Configuration
- 3.3.12 NVMe Configuration
- 3.3.13 Onboard Devices Configuration
- 3.3.14 Miscellaneous
- 3.3.15 APM Configuration
- 3.3.16 EzFlash
- 3.3.17 Watchdog Timer
- 3.4 Hardware Monitor menu
- 3.5 Security menu
- 3.6 Boot menu
- 3.7 Exit menu
- Appendix
- BIOS setup
3-7
Chapter 3: BIOS setup
Detect Timeout
Allows you to set the time (milliseconds) of waiting for link to exit Detect state for
enabled ports before assuming there is no device and potentially disabling the port.
Use the <+> and <-> keys to adjust the value or input the desired value.
Hot Plug
These items allow you to enable/disable PCIEX16 (G3) slot Hot Plug support.
Conguration options: [Disabled] [Enabled]
Detect Non-Compliance Device
Allows you to enable or disable the detection function of non-compliance PCI Express
device. Conguration options: [Disabled] [Enabled]
PCIEX1 (G3) Slot
PCIEx1 (G3) Slot
This item allows you to enable or disable the PCIEx1 (G3) slot. Conguration options:
[Disabled] [Enabled]
ASPM
This item allows you to control the Active State Power Management on both NB
(NorthBridge) side and SB (SouthBridge) side of the DMI Link. Conguration options:
[Disabled] [L1] [Auto]
L1 Substates
This item allows you to select the PCI Express L1 Substates settings. Conguration
options: [Disabled] [L1.1] [L1.1 & L1.2]
PCIe Speed
Congures the speed of PCIEx1 (G3) slot. Conguration options: [Auto] [Gen1] [Gen2]
[Gen3]
Detect Timeout
Allows you to set the time (milliseconds) of waiting for link to exit Detect state for
enabled ports before assuming there is no device and potentially disabling the port.
Use the <+> and <-> keys to adjust the value or input the desired value.
Hot Plug
These items allow you to enable/disable PCIEX1 (G3) slot Hot Plug support.
Conguration options: [Disabled] [Enabled]
Detect Non-Compliance Device
Allows you to enable or disable the detection function of non-compliance PCI Express
device. Conguration options: [Disabled] [Enabled]
3.3.6 CSM Configuration
CSM Support
Allow you to enable/disable the CSM support. Conguration options: [Disabled] [Enabled]
Network
Controls the execution of UEFI and Legacy PXE OpROM. Conguration options: [Do not
launch] [UEFI] [Legacy]