User Manual

ASUS EBE-4U
3-17
3.3.13 NVMe Configuration
The NVMe Conguration menu displays the NVMe controller and drive information of the
devices connected and allows you to congure NVMe device options settings.
3.3.14 Onboard Devices Configuration
HD Audio Controller
Allows you to control detection of the HD-Audio device. Conguration options:
[Enabled] [Disabled]
[Enabled] Enables the HD Audio Device unconditionally.
[Disabled] Disables the HD Audio Device unconditionally.
LAN1 I225
Conguration options: [Disabled] [Enabled]
Intel LAN1 OPROM
Allows you to launch Intel PXE OPROM. Conguration options: [Disabled] [Enabled]
LAN2 I219
Conguration options: [Disabled] [Enabled]
Intel LAN2 OPROM
Allows you to launch Intel PXE OPROM. Conguration options: [Disabled] [Enabled]
I2C0 Controller
Allows you to enable or disable the Serial IO Controller. Conguration options: [Disabled]
[Enabled]
WIFI (Wi-Fi Controller)
Allows you to enable or disable the WiFi controller. Conguration options: [Disabled]
[Enabled]
BT (Bluetooth Controller)
Allows you to enable or disable the bluetooth controller. Conguration options: [Disabled]
[Enabled]
3.3.15 EZ-Flash
This item allows you to enter EZ-Flash mode. After you press <Enter>, a conrmation
message appears. Use the left/right arrow key to select between [Yes] or [No], then press
<Enter> to conrm your choice.
3.3.16 APM Configuration
This item allows you to congure APM (Advanced Power Management) settings.
ErP Ready
Allows BIOS to switch off some power at S5 to get the system ready for ErP requirement.
When set to [Enabled], all other PME options will be switched off. Conguration options:
[Disabled] [Enabled]