English EeeBox PC User Manual EeeBox B2 Series / EB Series
E6386 English First Edition January 2011 Copyright © 2011 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER, INC. (“ASUS”).
Contents English Contents........................................................................................................ 3 Notices........................................................................................................... 5 CE Mark Warning................................................................................. 9 Safety information...................................................................................10 Notes for this manual......................................
Contents English Recovering the OS to the Factory Default Partition (F9 Recovery)..............................................................................................36 Backing up the Factory Default Environment Data to a USB Drive (F9 Backup)..............................................................................37 Using the USB storage device (USB Restore).................................38 ASUS contact information........................................
English Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • • This device may not cause harmful interference, and This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
RF exposure warning English This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
France Restricted Wireless Frequency Bands • • English Some areas of France have a restricted frequency band. The worst case maximum authorized power indoors are: 10mW for the entire 2.4 GHz band (2400 MHz–2483.5 MHz) 100mW for frequencies between 2446.5 MHz and 2483.5 MHz Channels 10 through 13 inclusive operate in the band 2446.6 MHz to 2483.5 MHz.
English This requirement is likely to change over time, allowing you to use your wireless LAN card in more areas within France. Please check with ART for the latest information (www.art-telecom.fr) Your WLAN Card transmits less than 100mW, but more than 10mW. Canadian Department of Communications Statement This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications.
REACH English Complying with the REACH (Registration, Evaluation, Authorization, and Restriction of Chemicals) regulatory framework, we publish the chemical substances in our products at ASUS REACH website at http://csr.asus.com/english/REACH.htm. CE Mark Warning CE marking for devices without wireless LAN/Bluetooth The shipped version of this device complies with the requirements of the EEC directives 2004/108/EC “Electromagnetic compatibility” and 2006/95/EC “Low voltage directive”.
Safety information English Your EeeBox PC is designed and tested to meet the latest standards of safety for information technology equipment. However, to ensure your safety, it is important that you read the following safety instructions. Setting up your system • • • • • • Read and follow all instructions in the documentation before you operate your system. Do not use this product near water or a heated source such as a radiator. Set up the system on a stable surface with the provided stand.
• • Liquid has been spilled into the system. The system does not function properly even if you follow the operating instructions. The system was dropped or the cabinet is damaged. The system performance changes. English • • Lithium-Ion Battery Warning CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions.
European Union Eco-label English This EeeBox PC has been awarded the EU Flower label, which means that this product has the following characteristics: 1. 2. 3. 4. 5. 6. Decreased energy consumption during use and stand-by modes. Limited use of toxic heavy metals. Limited use of substances harmful to the environment and health. Reduction of the use of natural resources by encouraging recycling. Extended product lifetime through the availability of spare parts. Reduced solid waste through takeback policy.
Notes for this manual English To make sure that you perform certain tasks properly, take note of the following symbols used throughout this manual. WARNING: Vital information that you MUST follow to prevent injury to yourself. IMPORTANT: Instructions that you MUST follow to complete a task. TIP: Tips and useful information that help you complete a task. NOTE: Additional information for special situations.
Welcome English Congratulations on your purchase of the EeeBox PC. The following illustration displays the package contents of your new EeeBox PC. If any of the below items is damaged or missing, contact your retailer.
Knowing your EeeBox PC English Front view Refer to the diagram below to identify the components on this side of the system. 1 2 3 4 5 6 1 Power switch The power switch allows powering ON and OFF the system. 2 Hard disk LED The hard disk LED blinks when data is being written into or read from the hard disk drive.
Memory card slot The built-in memory card reader reads MMC/SD/SDHC/ SDXC cards used in devices like digital cameras, MP3 players, mobile phones, and PDAs. 4 USB port The USB (Universal Serial Bus) port is compatible with USB devices such as keyboards, mouse devices, cameras, and hard disk drives. USB allows many devices to run simultaneously on a single computer, with some peripheral acting as additional plug-in sites or hubs.
Rear view English Refer to the diagram below to identify the components on this side of the system. 1 2 3 4 5 6 1 Wireless antenna jack The jack is used to connect the supplied wireless antenna to enhance wireless signal reception.
2 English Power input (DC 19V) The supplied power adapter converts AC power to DC power for use with this jack. Power supplied through this jack supplies power to the PC. To prevent damage to the PC, always use the supplied power adapter. The power adapter may become warm to hot when in use. Do not cover the adapter and keep it away from your body.
Top view English Refer to the diagram below to identify the components on this side of the system. 1 1 1 USB port The USB (Universal Serial Bus) port is compatible with USB devices such as keyboards, mouse devices, cameras, and hard disk drives. USB allows many devices to run simultaneously on a single computer, with some peripheral acting as additional plug-in sites or hubs.
Using the wireless antenna English The wireless antenna is connected to your EeeBox PC for enhancing wireless signal reception. Do not rotate the wireless antenna to the 180°–270° angle for preventing damage. ANT.
1. 2. 3. English Setting up the remote control (on selected models) Plug the IR receiver into any of the USB ports on your EeeBox PC. Place the IR receiver on a stable surface. Aim the remote control at the receiver when using the remote.
Positioning your EeeBox PC English Installing the stand Erect your EeeBox PC with the supplied stand. To do so: 1. 2. Locate the screw hole on the bottom of the EeeBox PC. Align the stand screw to the PC screw hole, and then secure the stand to the PC with a screw driver. E-SATA EeeBox PC bottom view 1 Screw hole Stand screw 2 Do not place your EeeBox PC on the desktop without the stand.
English Installing your EeeBox PC to a monitor You can also install your EeeBox PC to the back of a monitor. To do so: 1. Secure the VESA mount to your monitor with four screws (HNM/ M4 x 8). To fasten the VESA mount, your monitor must comply with VESA75 or VESA100 standard. 2. Place your EeeBox PC on the VESA mount noting the correct alignment, and then secure the PC to the VESA mount with the same stand screw used for securing the stand to the PC.
Setting up your EeeBox PC You need to connect peripherals before using your EeeBox PC. English Connecting to a display Connect one end of the HDMI/VGA cable to an LCD TV or an LCD monitor ( 1 ) and the other end to the HDMI/Display (Monitor) Output port on the system rear panel ( 2 ). 2 LCD monitor –or– LCD TV –or– 1 Connecting to USB devices Connect USB devices like wired/wireless keyboards (varying with areas), mouse devices, and printers to the USB ports on the system front panel.
Connecting to a network device English Connect one end of a network cable to the LAN port on the system rear panel and the other end to a hub or switch.
Turning on the system English Connect the supplied AC adapter to the DC IN jack on the system rear panel, and then press the power switch on the front panel to turn on the system. 3 4 2 1 • When your EeeBox PC is not in use, unplug the power adapter or switch off the AC outlet to save on power consumption. • Adjust the power management settings in the Window® Control Panel. This is to ensure that your EeeBox PC is set to a low power consumption mode and is fully operational at the same time.
Using your EeeBox PC English All screenshots in this section are for reference only. Actual screen images may vary with operating systems. Visit the ASUS website at www.asus.com for the latest information. Configuring wireless connection To connect to a wireless network, follow the instructions below: For security concerns, DO NOT connect to an unsecured network. Otherwise, the transmitted information without encryption might be visible to others. 1.
Configuring wired connection English To establish a wired network, follow the instructions below: Using a dynamic IP / PPPoE network connection: 1. Click the network icon with a yellow warning triangle in the Windows® Notification area and select Open Network and Sharing Center. 28 2. Click Change adapter settings in the left blue pane. 3. Right-click Local Area Connection and select Properties.
Click Internet Protocol Version 4(TCP/IPv4) and click Properties. 5. Click Obtain an IP address automatically and click OK. English 4. (Continue the following steps if using PPPoE) 6. Return to the Network and Sharing Center and then click Set up a new connection or network.
Select Connect to the Internet and click Next. 8. 9. Enter your User name and, Password, and Connection name. Click Connect. 10. Click Close to finish the configuration. English 7. 11. Click the network icon in the taskbar and click the connection you just created. 30 EeeBox PC Select Broadband (PPPoE) and click Next. 12. Enter your user name and password. Click Connect to connect to the Internet.
1. 2 3. 4. 5. English Using a static IP: Repeat the step 1–4 of Using a dynamic IP to start the static IP network configuration. Click Use the following IP address. Enter the IP address, Subnet mask and Gateway from your service provider. If needed, enter the preferred DNS Server address and alternative address. After entering all the related values, click OK to build the network connection.
English Configuring audio output via an HDMI device If you use your TV with an HDMI connector as an audio output device, connect it to the Home Theater PC and follow the steps below to configure audio settings: 1. Right-click the Volume Mixer icon on the Windows® notification area and click Playback devices. 2. Under the Playback window, select Digital Audio (HDMI) and click Set Default. Click Configure and the Speaker Setup window pops up. 3. 4. 32 Select Stereo and click Next.
6. Check the Front left and right box, and then click Next. Click Finish to exit the speaker setup. English 5.
ASUS Easy Update English ASUS Easy Update is a software tool that automatically detects and downloads the latest BIOS, drivers, and applications for your EeeBox PC. 1. From the Windows® notification area, right-click the ASUS Easy Update icon. 2. Select Schedule to set how often you want to update your system. Select Update to activate the update. 3. 34 4. Click OK to display the items you can download. 5. Check the item(s) you want to download, and then click OK.
TotalMedia Theater 3 • TotalMedia Theater 3 is only available on selected models. • The built-in optical disk drive and the supported format may vary with models. EeeBox PC English TotalMedia Theater 3 allows you to play DVDs. When you insert a DVD into the optical drive, it will begin to play automatically. TotalMedia Theater 3 also supports Youtube DXVA, WMV HD DXVA, MCE plug-in, and playback of video files.
Recovering your system English Using the recovery partition The recovery partition includes an image of the operating system, drivers, and utilities installed on your system at the factory. The recovery partition provides a comprehensive recovery solution that quickly restores your system’s software to its original working state, provided that your hard disk drive is in good working order.
When the recovery is completed successfully, click Reboot to restart the system. English 8. Backing up the Factory Default Environment Data to a USB Drive (F9 Backup) 1. 2. 3. Repeat the step 1–4 in the previous section. Select Backup the Factory Environment to a USB Drive and click Next. Connect a USB storage device to your PC to start the Factory Default Environment backup. The required size of the connected USB storage device should be larger than 15GB. The actual size may vary with your PC model.
English Using the USB storage device (USB Restore) When the Recovery Partition in your system is crashed, use the USB storage device to restore the system to the factory default partition or the factory environment data to the entire hard disk. 1. 2. Disable Boot Booster in BIOS setup. Connect the USB storage device that you back up the factory environment data to. 3. Press for EeeTop PC or for EeeBox PC on bootup and the Please select boot device screen appears.
We, the undersigned, Manufacturer: ASUSTek COMPUTER INC. Country: TAIWAN Authorized representative in Europe: ASUS COMPUTER GmbH Address, City: No. 150, LI-TE RD., PEITOU, TAIPEI 112, TAIWAN R.O.C. Address, City: HARKORT STR.
ASUS contact information English ASUSTeK COMPUTER INC. Address Telephone Fax E-mail Web site 15 Li-Te Road, Peitou, Taipei, Taiwan 11259 +886-2-2894-3447 +886-2-2890-7798 info@asus.com.tw www.asus.com.tw Technical Support Telephone Online support +86-21-38429911 support.asus.com ASUS COMPUTER INTERNATIONAL (America) Address Telephone Fax Web site 800 Corporate Way, Fremont, CA 94539, USA +1-812-282-3777 +1-510-608-4555 usa.asus.
