User Manual

3-19
Chapter 3: BIOS setup
3. From the Create New Password box, key in a new password, then press <Enter>.
4. Conrm the password when prompted.
To clear the administrator password, follow the same steps as in changing an
administrator password, but press <Enter> when prompted to create/conrm the
password.
3.5.2 User Password
If you have set a user password, you must enter the user password for accessing
the system.
To set a user password:
1. Select the User Password item and press <Enter>.
2. From the Create New Password box, key in a password, then press <Enter>.
3. Conrm the password when prompted.
To change a user password:
1. Select the User Password item and press <Enter>.
2. From the Enter Current Password box, key in the current password, then press <Enter>.
3. From the Create New Password box, key in a new password, then press <Enter>.
4. Conrm the password when prompted.
To clear a user password:
1. Select the Clear User Password item and press <Enter>.
2. Select Yes from the Warning message window then press <Enter>.
3.5.3 Secure Boot
Secure Boot feature is active when Secure Boot is set to [Enabled], Platform Key
(PK) is enrolled and the system is running in User mode. Changing the mode
requires platform reset. Conguration options: [Disabled] [Enabled]
Secure Boot Mode
Allows you to select Secure Boot Mode. When set to [Custom], Secure Boot Policy
variables can be congured by a physically present user without full authentication.
Conguration options: [Standard] [Custom]
Key Management
Allows you to modify Secure Boot Policy variables without full authentication.
Platform Key (PK)
Conguration options: [Details] [Export] [Update] [Delete]
Key Exchange Keys / Authorized Signatures
Conguration options: [Details] [Export] [Update] [Append] [Delete]
Forbidden Signatures