User Manual

3-13
Chapter 3: BIOS setup
Legacy OS. Conguration options: [80x24] [80x25]
Redirect After POST
Conguration options: [Always Enable] [BootLoader]
[Always Enable] Legacy Console Redirection is enabled for Legacy OS.
[BootLoader] Legacy Console Redirection is disabled before booting
to Legacy OS.
3.3.11 SATAAndRSTConguration
This item allows you to congure SATA device options settings.
SATA Controller(s)
Allows you to enables or disables the onboard SATA device.
Conguration options: [Disabled] [Enabled]
The following item appears only when you set SATA Controller(s) to [Enabled].
SATA Mode Selection
Allows you to determine how SATA controller(s) operate. Conguration options:
[AHCI] [Intel RST Premium With Intel Optane System Acceleration]
[AHCI] Set to [AHCI] when you want the SATA hard disk drives to
use the AHCI (Advanced Host Controller Interface). The AHCI
allows the onboard storage driver to enable advanced Serial
ATA features that increases storage performance on random
workloads by allowing the drive to internally optimize the order
of commands.
[Intel RST Premium
With Intel Optane
System Acceleration]
Set to [Intel RST Premium With Intel Optane System
Acceleration] when you want to create a RAID conguration
from the SATA hard disk drives.
The following items appear only when you set SATA Mode Selection to [Intel
RST Premium With Intel Optane System Acceleration].
Sata Interrupt Selection
Allows you to select which interrupt will be available to the operating system.
This option only takes effect if SATA controller is in RAID mode.
Conguration options: [Msix] [Msi] [Legacy]
RAID Device ID
Allows you to choose RAID device ID.
Conguration options: [Client] [Alternate]
Aggressive LPM Support
Allows you to enable PCH to aggressively enter link power state.
Conguration options: [Disabled] [Enabled]
Serial ATA Port 1(~3)