User Manual

3-11
Chapter 3: BIOS setup
[Disabled] [Enabled]
SerialPort4Conguration
This item allows you to set parameters of Serial Port 4 (COMD).
Serial Port
Allows you to enable or disable the serial port (COM).Conguration options:
[Disabled] [Enabled]
SerialPort5Conguration
This item allows you to set parameters of Serial Port 5 (COME).
Serial Port
Allows you to enable or disable the serial port (COM).Conguration options:
[Disabled] [Enabled]
3.3.10 Serial Console Redirection
COM1(~5)
Console Redirection
Allows you enable or disable the console redirection feature.
Conguration options: [Enabled] [Disabled]
The following item is accessible when you set Console Redirection to [Enabled].
Console Redirection Settings
The settings specify how the host computer and the remote computer (which
the user is using) will exchange data. Both computers should have the same or
compatible settings.
Terminal Type
Conguration options: [VT100] [VT100+] [VT-UTF8] [ANSI]
[VT100] ASCII char set.
[VT100+] Extends VT100 to support color, function keys, etc.
[VT-UTF8] Uses UTF8 encoding to map Unicode chars onto 1 or more bytes.
[ANSI]
Extended ASCII char set.
Bits per second
Allows you to select serial port transmission speed. The speed must be
matched on the other side. Long or noisy lines may require lower speeds.
Conguration options: [9600] [19200] [38400] [57600] [115200]
Data Bits
Conguration options: [7] [8]
Parity
A parity bit can be sent with the data bits to detect some transmission errors.