User Manual
Table Of Contents
- Notices
- Chapter 1: System introduction
- Chapter 2: Motherboard information
- Chapter 3: BIOS setup
- 3.1 BIOS setup program
- 3.2 Main menu
- 3.3 Advanced menu
- 3.3.1 LVDS Configuration
- 3.3.2 PCH-FW Configuration
- 3.3.3 Trusted Computing
- 3.3.4 CPU Configuration
- 3.3.5 Graphics Configuration
- 3.3.6 PCI Express Configuration
- 3.3.7 AMT Configuration
- 3.3.8 CSM Configuration
- 3.3.9 Super IO Configuration
- 3.3.10 Serial Console Redirection
- 3.3.11 SATA And RST Configuration
- 3.3.12 Network Stack Configuration
- 3.3.13 USB Configuration
- 3.3.14 NVMe Configuration
- 3.3.15 Onboard Devices Configuration
- 3.3.16 EZ-Flash
- 3.3.17 APM Configuration
- 3.3.18 Watchdog Timer
- 3.3.19 Miscellaneous
- 3.4 Hardware Monitor menu
- 3.5 Security menu
- 3.6 Boot menu
- 3.7 Exit menu
- Appendix
3-8
EB-ITX-B
PEG 0:1:0
Enable Root Port
Allows you to enable or disable the Root Port.
Conguration options: [Disabled] [Enabled] [Auto]
Max Link Speed
Allows you to congure PEG 0:1:0 Max Speed.
Conguration options: [Auto] [Gen1] [Gen2] [Gen3]
Max Link Width
Allows you to force PEG link to restrain to X1/2/4/8.
Conguration options: [Auto] [Force X1] [Force X2] [Force X4] [Force X8]
ASPM
Allows you to control ASPM support for the PEG 0, and this has no effect if PEG is not
the currently active device.
Conguration options: [Disabled] [Auto] [ASPM L0s] [ASPM L1] [ASPM L0sL1]
PEG 0:1:1
Enable Root Port
Allows you to enable or disable the Root Port.
Conguration options: [Disabled] [Enabled] [Auto]
Max Link Speed
Allows you to congure PEG 0:1:1 Max Speed.
Conguration options: [Auto] [Gen1] [Gen2] [Gen3]
Max Link Width
Allows you to force PEG link to restrain to X1/2/4.
Conguration options: [Auto] [Force X1] [Force X2] [Force X4]
ASPM
Allows you to control ASPM support for the PEG 1, and this has no effect if PEG is not
the currently active device.
Conguration options: [Disabled] [Auto] [ASPM L0s] [ASPM L1] [ASPM L0sL1]
PEG 0:1:2
Enable Root Port
Allows you to enable or disable the Root Port.
Conguration options: [Disabled] [Enabled] [Auto]
Max Link Speed
Allows you to congure PEG 0:1:2 Max Speed.
Conguration options: [Auto] [Gen1] [Gen2] [Gen3]
Max Link Width
Allows you to force PEG link to restrain to X1/2.
Conguration options: [Auto] [Force X1] [Force X2]
ASPM
This item allows you to control ASPM support for the PEG 2, and this has no effect if
PEG is not the currently active device.
Conguration options: [Disabled] [Auto] [ASPM L0s] [ASPM L1] [ASPM L0sL1]
3.3.7 AMTConguration
This item allows you to congure Intel
®
Active Management Technology parameters.